Authors:
Morentin Etayo, Alvaro
Abstract:
In recent years, aircraft manufacturers have been making progress in the design of more efficient aircrafts to reduce the environmental footprint. To attain this target, aircrafts manufactures work on the replacement of the hydraulic and bleed systems for electrical systems leading to a “More Electrical Aircraft”. However, the expected mass gain is a challenge, as previous technologies have been developed and optimized for decades. The new electrical solutions need to be look into detail to be competitive with previous technologies. All deg (...)
In recent years, aircraft manufacturers have been making progress in the design of more efficient aircrafts to reduce the environmental footprint. To attain this target, aircrafts manufactures work on the replacement of the hydraulic and bleed systems for electrical systems leading to a “More Electrical Aircraft”. However, the expected mass gain is a challenge, as previous technologies have been developed and optimized for decades. The new electrical solutions need to be look into detail to be competitive with previous technologies. All degrees of freedom must be considered, that is, new technologies and architectures. In particular, an HVDC network that reduces the number of rectifier stages seems a promising solution. From the HVDC network, the different three phase AC loads will be supplied by a series of power generic inverters. As the power consumption of the different loads change during the flight mission, the same inverter is used to supply different loads. The connection between the inverters and the loads is managed by a matrix of contactors. The proposed solution also considers redundant configurations, thus increasing system robustness. The design of the innovative system is presented in this document. That is, determining the optimal trade-off between the number of power inverters and the nominal power of each generic inverter that will also impact the size of the matrix of contactors. However, to assess the combinatory problem, the mass of the different components as a function of the nominal power needs to be calculated. A design environment is therefore created to perform automatic and optimized design of power converters. The different components are described using a “direct modelling” approach and coded using “object-oriented” programming. The components are validated experimentally or by numerical simulations. The different models are coupled to an optimization environment and to a frequency solver allowing a fast calculation of the steady-state waveforms. The optimization environment performs the precise design of the different parts of the power inverter: heatsink, power module, DC filter and coupling inductor. The power inverter is designed for different values of nominal power and switching frequency. The optimization assesses as well the usage of different technologies. Finally, the results are used to determine the optimal trade-off between the number of inverters and the nominal power of each inverter using a heuristic algorithm.
(Read More)